Plant Utilities Engineer 1
Operate steam and hot water boilers including lighting off, firing, cleaning and shutting down systems o Operate central and auxiliary computers which monitor, test, control and operate boilers, auxiliary equipment and HVAC systems. o Service and maintain residential heating and air conditioning equipment. o Conduct boiler, HVAC, and water systems testing, analyzing results and adding chemicals to maintain proper residuals in boiler and piping systems. o Operate large central absorption, centrifugal, screw driven and hermetic chiller systems and other refrigeration equipment. Duties include starting, regulating and troubleshooting to maintain proper temperature. o Will be required to perform operations and maintenance within an asbestos environment and/or supervise any asbestos removal project being carried out by other employees or private contractors. o Handle various types of hazardous materials, such as refrigerants, Freon, gas, fuel oil, solvents, antifreeze, biocides, nitrates, ethanol, acids, caustic soda, regulated waste and refuse. o Respond to incidents having potential environmental impact and/or safety concerns, such as chemical spills, oil spills and blowouts and may be called upon to implement evacuation plans in emergency situations o Work in confined space situations using personal protective equipment and supervise others working in confined space using personal protective equipment o May require daily travel within the district, as well as some travel within NY State to assist other districts with special projects o Candidate will be trained in the operation and maintenance procedures as related to Asbestos Containing Materials. PREFERRED REQUIREMENTS:
o Working knowledge of the methods, materials, tools and equipment used in the trade or trades to which assigned o Working knowledge of the methods, materials and tools used in making mechanical and routine electrical repairs to heating, ventilating, air-conditioning, refrigeration, plumbing, pneumatic control systems and direct digital and other microprocessor controlled systems. o Working knowledge of safety standards and procedures o Ability to understand and carry out written and oral instructions. o Will be required to train and supervise others. o Will be required to plan and lay out work, develop time and material lists for projects assigned o Will be required to read and interpret plans, codes, diagrams, architectural blueprints and specifications. o Basic computer skills preferred o Valid NYS driver's License
Job Function
Operate steam and hot water boilers including lighting off, firing, cleaning and shutting down systems o Operate central and auxiliary computers which monitor, test, control and operate boilers, auxiliary equipment and HVAC systems. o Service and maintain residential heating and air conditioning equipment. o Conduct boiler, HVAC, and water systems testing, analyzing results and adding chemicals to maintain proper residuals in boiler and piping systems. o Operate large central absorption, centrifugal, screw driven and hermetic chiller systems and other refrigeration equipment. Duties include starting, regulating and troubleshooting to maintain proper temperature. o Will be required to perform operations and maintenance within an asbestos environment and/or supervise any asbestos removal project being carried out by other employees or private contractors. o Handle various types of hazardous materials, such as refrigerants, Freon, gas, fuel oil, solvents, antifreeze, biocides, nitrates, ethanol, acids, caustic soda, regulated waste and refuse. o Respond to incidents having potential environmental impact and/or safety concerns, such as chemical spills, oil spills and blowouts and may be called upon to implement evacuation plans in emergency situations o Work in confined space situations using personal protective equipment and supervise others working in confined space using personal protective equipment o May require daily travel within the district, as well as some travel within NY State to assist other districts with special projects o Candidate will be trained in the operation and maintenance procedures as related to Asbestos Containing Materials. PREFERRED REQUIREMENTS:
o Working knowledge of the methods, materials, tools and equipment used in the trade or trades to which assigned o Working knowledge of the methods, materials and tools used in making mechanical and routine electrical repairs to heating, ventilating, air-conditioning, refrigeration, plumbing, pneumatic control systems and direct digital and other microprocessor controlled systems. o Working knowledge of safety standards and procedures o Ability to understand and carry out written and oral instructions. o Will be required to train and supervise others. o Will be required to plan and lay out work, develop time and material lists for projects assigned o Will be required to read and interpret plans, codes, diagrams, architectural blueprints and specifications. o Basic computer skills preferred o Valid NYS driver's License
Salary Range:
From $51711 to $62806 Annually
Minimum Qualification
Candidates must be reachable on the current Civil Service eligible list for the title; OR Eligible to transfer via Section 70.1 of the Civil Service Law; OR Temporary Appointment:
Plant Utilities Engineer 1 is a continuous recruitment examination. Candidates interested in applying for the open competitive opportunity must complete the examination application NYS-APP-3 #20-450 & #20-451 Application Form/Supplemental Questionnaire at http:
//www.cs.ny.gov/announ/applications.cfm and submit it via email to:
odh.personnel@opwdd.ny.gov OR mail to:
Capital District DDSOO Human Resources Office Building 1 500 Balltown Road Schenectady, New York 12304 Minimum
Qualifications:
Either 1. Graduate of heating, HVAC, ventilation, air conditioning, and refrigeration apprenticeship program from the U.S. Air Force; Or 2. Must have been an enlisted machinery technician (MK) with the U.S. Coast Guard OR possession of a certificate as a Marine Engineer issued by the U.S. Coast Guard; Or 3. Must have been an enlisted power generation equipment repairer with the U.S. Army; Or 4. Must have been an enlisted gas turbine systems technician, submarine nuclear propulsion plant operator reactor control, utilities man, machinist mate, or engineman with the U.S. Navy; Or 5. Must have a Merchant Mariner's Document (MMD) and have been a qualified member of the engine department (QMED) as an oiler, fireman/water tender, refrigerating engineer or engineman with the U.S. Merchant Marine; Or 6. Completion of a New York State Department of Labor registered apprenticeship program for stationary engineers, plant maintenance (plumber/steamfitter), HVAC Mechanic or plant maintenance (refrigeration/AC) (See Note #1); Or 7. Possession of a High-Pressure Boiler Operating Engineer License or Stationary Engineer License; Or 8. A bachelor's degree in Facilities Engineering, Mechanical Engineering, Electrical Engineering, or Marine Engineering; Or 9. Four years of full-time hands on experience in the maintenance and operation of commercial, industrial, institutional facility, computer applications of digital energy platforms and building analytics and/or performing diagnosis, repair of HVAC systems or boilers or auxiliary equipment; Or 10. Four years of full-time hands on experience in a residential setting performing diagnosis, operation, maintenance repair of HVAC systems or boilers or auxiliary equipment; Or 11. An associate's degree in HVAC AND two years of qualifying experience as described in EITHER qualification #9 or #10 above; Or 12. Completion of an HVAC certificate or diploma from a BOCES program (900 hours) OR completion of an approved certificate in HVAC, electrical, refrigeration, boiler operations and maintenance, or plumbing from an accredited technical school or technology college (See Note #2) AND two years of qualifying experience as described in EITHER qualification #9 or #10 above. Notes 1. Information regarding qualifying New York State Department of Labor recognized apprenticeship programs can be found here:
https:
//labor.ny.gov/apprenticeship/appindex.shtm. 2. Certification programs must be accredited by the Accrediting Commission of Career Schools and Colleges (ACCSC) or recognized by the New York State Education Department Bureau of Proprietary School Supervision (BPSS). Information on ACCSC accredited programs can be found here:
http:
//www.accsc.org/ . Information on BPSS recognized proprietary schools can be found here:
http:
//www.acces.nysed.gov/bpss/welcome-career-training-proprietary-schools. 3. Your degree must have been awarded by a college or university accredited by a regional, national, or specialized agency recognized as an accrediting agency by the U.S. Department of Education/U.S. Secretary of Education. If your degree was awarded by an educational institution outside the United States and its territories, you must provide independent verification of equivalency. You can write to the Examination Information Desk of the NYS Department of Civil Service for a list of acceptable companies who provide this service. This information can also be found on the Internet at http:
//www.cs.ny.gov/jobseeker/degrees.cfm. You must pay the required evaluation fee.Estimated Salary: $20 to $28 per hour based on qualifications.
o Working knowledge of the methods, materials, tools and equipment used in the trade or trades to which assigned o Working knowledge of the methods, materials and tools used in making mechanical and routine electrical repairs to heating, ventilating, air-conditioning, refrigeration, plumbing, pneumatic control systems and direct digital and other microprocessor controlled systems. o Working knowledge of safety standards and procedures o Ability to understand and carry out written and oral instructions. o Will be required to train and supervise others. o Will be required to plan and lay out work, develop time and material lists for projects assigned o Will be required to read and interpret plans, codes, diagrams, architectural blueprints and specifications. o Basic computer skills preferred o Valid NYS driver's License
Job Function
Operate steam and hot water boilers including lighting off, firing, cleaning and shutting down systems o Operate central and auxiliary computers which monitor, test, control and operate boilers, auxiliary equipment and HVAC systems. o Service and maintain residential heating and air conditioning equipment. o Conduct boiler, HVAC, and water systems testing, analyzing results and adding chemicals to maintain proper residuals in boiler and piping systems. o Operate large central absorption, centrifugal, screw driven and hermetic chiller systems and other refrigeration equipment. Duties include starting, regulating and troubleshooting to maintain proper temperature. o Will be required to perform operations and maintenance within an asbestos environment and/or supervise any asbestos removal project being carried out by other employees or private contractors. o Handle various types of hazardous materials, such as refrigerants, Freon, gas, fuel oil, solvents, antifreeze, biocides, nitrates, ethanol, acids, caustic soda, regulated waste and refuse. o Respond to incidents having potential environmental impact and/or safety concerns, such as chemical spills, oil spills and blowouts and may be called upon to implement evacuation plans in emergency situations o Work in confined space situations using personal protective equipment and supervise others working in confined space using personal protective equipment o May require daily travel within the district, as well as some travel within NY State to assist other districts with special projects o Candidate will be trained in the operation and maintenance procedures as related to Asbestos Containing Materials. PREFERRED REQUIREMENTS:
o Working knowledge of the methods, materials, tools and equipment used in the trade or trades to which assigned o Working knowledge of the methods, materials and tools used in making mechanical and routine electrical repairs to heating, ventilating, air-conditioning, refrigeration, plumbing, pneumatic control systems and direct digital and other microprocessor controlled systems. o Working knowledge of safety standards and procedures o Ability to understand and carry out written and oral instructions. o Will be required to train and supervise others. o Will be required to plan and lay out work, develop time and material lists for projects assigned o Will be required to read and interpret plans, codes, diagrams, architectural blueprints and specifications. o Basic computer skills preferred o Valid NYS driver's License
Salary Range:
From $51711 to $62806 Annually
Minimum Qualification
Candidates must be reachable on the current Civil Service eligible list for the title; OR Eligible to transfer via Section 70.1 of the Civil Service Law; OR Temporary Appointment:
Plant Utilities Engineer 1 is a continuous recruitment examination. Candidates interested in applying for the open competitive opportunity must complete the examination application NYS-APP-3 #20-450 & #20-451 Application Form/Supplemental Questionnaire at http:
//www.cs.ny.gov/announ/applications.cfm and submit it via email to:
odh.personnel@opwdd.ny.gov OR mail to:
Capital District DDSOO Human Resources Office Building 1 500 Balltown Road Schenectady, New York 12304 Minimum
Qualifications:
Either 1. Graduate of heating, HVAC, ventilation, air conditioning, and refrigeration apprenticeship program from the U.S. Air Force; Or 2. Must have been an enlisted machinery technician (MK) with the U.S. Coast Guard OR possession of a certificate as a Marine Engineer issued by the U.S. Coast Guard; Or 3. Must have been an enlisted power generation equipment repairer with the U.S. Army; Or 4. Must have been an enlisted gas turbine systems technician, submarine nuclear propulsion plant operator reactor control, utilities man, machinist mate, or engineman with the U.S. Navy; Or 5. Must have a Merchant Mariner's Document (MMD) and have been a qualified member of the engine department (QMED) as an oiler, fireman/water tender, refrigerating engineer or engineman with the U.S. Merchant Marine; Or 6. Completion of a New York State Department of Labor registered apprenticeship program for stationary engineers, plant maintenance (plumber/steamfitter), HVAC Mechanic or plant maintenance (refrigeration/AC) (See Note #1); Or 7. Possession of a High-Pressure Boiler Operating Engineer License or Stationary Engineer License; Or 8. A bachelor's degree in Facilities Engineering, Mechanical Engineering, Electrical Engineering, or Marine Engineering; Or 9. Four years of full-time hands on experience in the maintenance and operation of commercial, industrial, institutional facility, computer applications of digital energy platforms and building analytics and/or performing diagnosis, repair of HVAC systems or boilers or auxiliary equipment; Or 10. Four years of full-time hands on experience in a residential setting performing diagnosis, operation, maintenance repair of HVAC systems or boilers or auxiliary equipment; Or 11. An associate's degree in HVAC AND two years of qualifying experience as described in EITHER qualification #9 or #10 above; Or 12. Completion of an HVAC certificate or diploma from a BOCES program (900 hours) OR completion of an approved certificate in HVAC, electrical, refrigeration, boiler operations and maintenance, or plumbing from an accredited technical school or technology college (See Note #2) AND two years of qualifying experience as described in EITHER qualification #9 or #10 above. Notes 1. Information regarding qualifying New York State Department of Labor recognized apprenticeship programs can be found here:
https:
//labor.ny.gov/apprenticeship/appindex.shtm. 2. Certification programs must be accredited by the Accrediting Commission of Career Schools and Colleges (ACCSC) or recognized by the New York State Education Department Bureau of Proprietary School Supervision (BPSS). Information on ACCSC accredited programs can be found here:
http:
//www.accsc.org/ . Information on BPSS recognized proprietary schools can be found here:
http:
//www.acces.nysed.gov/bpss/welcome-career-training-proprietary-schools. 3. Your degree must have been awarded by a college or university accredited by a regional, national, or specialized agency recognized as an accrediting agency by the U.S. Department of Education/U.S. Secretary of Education. If your degree was awarded by an educational institution outside the United States and its territories, you must provide independent verification of equivalency. You can write to the Examination Information Desk of the NYS Department of Civil Service for a list of acceptable companies who provide this service. This information can also be found on the Internet at http:
//www.cs.ny.gov/jobseeker/degrees.cfm. You must pay the required evaluation fee.Estimated Salary: $20 to $28 per hour based on qualifications.
|
|
 | |
